Industrial Line

Shell and tubes heat exchanger according to TEMA DEU standards. Specially recommended for very high pressure conditions (up to 1000 bar(g) ); the tube bundle incorporates corrugated or plain tubes.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

Shell and tubes heat exchanger according to TEMA NEN standard. This design with removable back end flanges allows tube side inspection without dismantling the heat exchanger from the pipeline.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

Monotube design heat exchanger, with fully welded design or with removable inner tube. Tubes can be corrugated, dimpled or plain.

Recommended for processing sludge, slurries and fluids in general with solids in suspension of any size.

Standard range design conditions: temperature 350ºC and pressure 25 bar(g) (others on request). Manufactured in stainless steel, Duplex and Titanium.

Shell and tubes heat exchanger with fixed tubesheets with corrugated tube bundle (other tube profiles available).

Standard range temperature conditions 350ºC and 200 bar(g) pressure (others upon request).

Manufactured in stainless steel, Duplex, Titanium, special alloys (Hastelloy, Incolloy, Inconel, etc), carbon steel and any other metal (except Tantalum).

Shell and tubes heat exchanger according to TEMA BEW standard, with floating tubesheets, B head type, removable tube bundle, with corrugated or plain tubes.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

Shell and tubes heat exchanger designed according to TEMA BKU standard usually utilized as reboiler. The tubes bundle includes corrugated U-tubes, and also other tube profiles and plain tubes.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

Shell and tubes heat exchanger according to TEMA BEU standard. Tube bundle incorporates corrugated U tubes, another tube profiles or plain tubes are available depending on the fluid characteristics.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

This heat exchanger includes double concentric tubes instead of a single one (like standard shell and tubes) so there are two walls separating the product and service media. This way a super secure system is created to prevent cross contamination between both fluids. A leak detection system monitors any pressure change in the separation chamber warning any tube or seam crack. According to the design temperature and pressure conditions and fluids process, materials can be: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium , coppernickel and carbon steel.

Monotube design heat exchanger specially designed for heat recovery applications when fluids contain solids in suspension (sludge, slurries, fibres).

Tubes can be corrugated, dimpled or plain.

Standard range design conditions: temperature 350ºC and pressure 25 bar(g) (others on request). Manufactured in stainless steel, Duplex and Titanium.

Monotube heat exchanger that incorporates squared shells and round inner tubes. This design permits a very compact solution with a minimum footprint. Inner tube can be fixed or removable, usually corrugated or plain.

Recommended for processing sludge, slurries and fluids in general with solids in suspension of any size.

Standard range design conditions: temperature 100ºC and pressure 5 bar(g) (others on request). Manufactured in stainless steel.

This heat exchanger includes a tube bundle with U-tubes inside a U-shaped shell. Tubes corrugated or plain. Flow is pure countercurrent and enables very high temperatures crossing between tube side and shell side fluids.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

This heat exchanger includes a U-tube inside a U-shaped shell. Inner tube corrugated or plain. Flow is pure countercurrent and enables very high temperatures crossing between tube side and shell side fluids.

According to the design temperature and pressure conditions and fluids process, materials are selected from all metals available like: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), titanium alloys (grade 1, 2, 3, 4, 7 and 11), coppernickel Cu/Ni 90/10 and 70/30, Admiralty brass, copper and carbon steel.

Formed by two concentric tubes that are coiled to become a very compact and self-drainable heat exchanger. It has no interconnections and gaskets being ideal for high pressure applications. The inner tube can be corrugated or dimpled.

Design conditions: Temperature max 180ºC, pressure max 25 bar(g) (higher conditions on request).

Materials of construction: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), and titanium alloys (grade 1, 2, 3, 4, 7 and 11).

A coiled inner tube is contained inside a calandria. The product flows inside the tube while the service media runs outside.

It has no interconnections and gaskets being ideal for high pressure applications. The inner tube can be corrugated, dimpled or plain.

Design conditions: Temperature max 180ºC, pressure max 25 bar(g) (higher conditions on request).

Materials of construction: austenitic stainless steels, duplex, high temperature resistance steels, superaustenitic, exotic alloys (Inconel, Incolloy, Monel, Hastelloy), and titanium alloys (grade 1, 2, 3, 4, 7 and 11).

Scraped surface heat exchanger with multi-tube design, recommended for high viscosity fluids and/or high fouling applications.

Heating, cooling, condensation and evaporation processes.

Temperature conditions 250ºC and 25 pressure (others on request). Manufactured in stainless steel and Duplex.